Automated Hay Feeder Table | LargeGet latest price

Features of this product

• The machine accepts both 32" x 35" and 46" x 35" large bales.
• This table then advances the large bales into the cutter box which tilts them on their edge to allow for the proper cut.
• Once the bale has been sliced into sections of 16" x 35", the bottom slab is slid over, allowing the next slab to fall down behind.
• These slabs are then pushed forward into the weigh chamber while the operator removes the old twines.
• The entire process happens in approximately 30 seconds with the standard machine, or 15 seconds with the higher power option.
• The power for this operation comes from an electric driven hydraulic power station consisting of multiple 30hp motors, each driving hydraulic pumps.
• The automation is controlled by a PLC (Programmable Logic Controller), with full operator manual overrides.
• All manual functions are protected by the PLC to prevent operator damage.
• All necessary guarding is supplied and safety shutdowns and lockout systems are integrated via the PLC.