DrainSAFE™ – Stormwater isolation and pollution prevention device.
Stop spills from leaving your site. Control oils, sediment and gross pollutants 24/7. Comply with environmental regulations. DrainSAFE™ is a stormwater isolation and pollution prevention device.
Stop spills from leaving your site.
In an emergency, turn the handle to seal your stormwater system. DrainSAFE™ is a unique above ground manual stormwater isolation device. Turn the handle to close the isolation valve to stop flow into the stormwater system. One person can quickly and easily shut the DrainSAFE™ unit to contain spills in an emergency.
Control what is entering the stormwater system.
DrainSAFE™ traps oils, sediment and gross pollutants 24/7. The practical design allows water to flow through while sediment and gross pollutants are retained in the body of the unit. Hydrocarbons are trapped by an absorbent material secured within the diffuser body.
Comply with environmental regulations.
Avoid harsh fines and penalties related to stormwater pollution. DrainSAFE™ delivers on corporate objectives to meet standards enforced by the EPA. Install DrainSAFE™ in every drain pit for maximum effectiveness and meet compliance requirements for stormwater pollution management and spill response.
How does DrainSAFE™ work?
DrainSAFE™ has 2 positions – Open and Closed
In the OPEN position the DrainSAFE™ device will trap sediment, debris and hydrocarbons. Stormwater will continue to flow through the unit and into the stormwater system. This is ideal for continuous environmental compliance during normal operations on most sites.
In the CLOSED position the DrainSAFE™ unit becomes a stormwater isolation device that will block the drain and stop flow through the device. Left in the closed position, storm water will not flow through the device which could lead to flooding. Ideally a DrainSAFE™ unit is closed only during risky activities or in response to a spill emergency.
DrainSAFE Specifications
- Flow rate 33L/sec
- 510mm deep
- 560mm Dia
- Manufactured tolerance +/- 2mm
- Weight 19kg
- Capacity 80L
Track Record
DrainSAFE™ has a 10 year track record of very successful installations across Australia with proven efficacy and long lifespan.
LEARN MORE: https://www.drainsafe.co
To contact Chatoyer about DrainSAFE™ – Stormwater isolation and pollution prevention device. use Get a quote.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales