The Atlas Copco PAC H108 self-priming centrifugal diesel pumps are for applications where the main feature is the difficulty in priming.
Description
Documents
In Stock
Available as a Canopy or open set - the PAC H108 pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension. For more information - please refer to the attached Atlas Copco PDF brochure
Additional Benefits
Pump - (High efficiency: 82% (B.E.P.) Rapid “dry” priming - (Up to a height of 7,5 m (24.6 ft) High resistance - (To abrasive liquids and turbid sandy waters) Closed impeller - (Solids handling up to 89 mm (3.5") Diaphragm vacuum pump -(Suitable for dry running: no contamination of the environment) Mechanical shaft seal in oil bath - (It allows the “dry running” operation of the pump)
Get a quote
Let Compressed Air Light & Power provide you with a quote
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales